Guide to Road Bike Gears – Shimano, SRAM and Campagnolo Range Order

Words by Cycles UK

on 20/12/2018 16:58:36

riding near Menton/France

2018 Trek Emonda ALR
pic by ©kramon

If you are buying a road bike one of the big differences between models will be which gears they use. Most manufacturers will make the same bike, using the same frame but put different gears and wheels on it. So for instance you can buy a Cannondale Synapse Carbon Disc Tiagra for £1799 or get the Cannondale Synapse Carbon Disc Ultegra for £2699. They are fundamentally the same bike, but one comes with the Shimano Tiagra gears and the other comes with Shimano Ultegra gears.

In most cases the bottom of the range gears and top of the range gears will basically work in the same way. The big differences are in the quality of material used and the weight. Top of the range gears will be lighter and smoother to use.

One thing to watch out for when comparing bikes is whether the full groupset is being used. If you are buying a bike which has, for instance, Shimano 105 gears on it Shimano make 105 brakes, gear levers, front and rear derailleurs, cranks, chainrings and bottom brackets. So basically all of the running gear on the bike. Some bike manufacturers will fit the full groupset, others will fit Shimano 105 front and rear derailleurs but use their own brakes and cranks to save a few pounds. So if you are comparing bikes be sure to check how much of the groupset the bike actually uses.

How many gears do you need?

Gear technology is moving pretty quickly at the moment. The current standard for road bikes is 11 speed. That means 11 gears on the back and two on the front giving 22 gears in total. However there are 12 speed options available and some people are experimenting with single chainrings at the front (1x setups). If you buy a 9 or 10 speed bike it will be very expensive to upgrade to 11 speed later on as you will need new shifters, and maybe a new rear wheel, as well as a new derailleur, chain and cassette. So if you can afford 11 speed go for it.

Think about maintenance costs

If you plan on using your bike a lot, and keeping it more than a year or two, then you will end up having to replace bits. The first things to go other than brake pads are normally the chain, cassette and rear derailleur. If you ride your bike during the winter, or commute on it then things will wear out more quickly as dirt from the roads wears away the parts. A new Shimano Dura Ace rear derailleur is going to cost you well over £150 while a new cassette and chain will set you back over £250. The equivalent 105 derailleur would be under £50 and a 105 chain and cassette would be under £100. So if you regularly ride dirty gritty roads think about whether you really need that top of the range Dura-Ace setup.



Shimano Gear Range Order

Most of the road we sell use Shimano gears. Shimano have a reputation for making super reliable equipment and, as they are widely used, it’s really easy to get spares. Currently Shimano make traditional ‘mechanical’ gears and the new electronic Di2 gears. The mechanical gears use a cable and springs to change the gears. The Di2 gears use electric switches which are much more precise and need less tuning to keep running smoothly. There are also disc and rim brake versions of most Shimano gears available.

From top to bottom the Shimano road bike gears order is:

  • Shimano Dura-Ace – Fitted to pro level top of the range bikes. Dura-Ace is available in Di2 and disc brake versions.
  • Shimano Ultegra -The choice of many experienced riders. Almost as smooth as Dura-Ace, just a bit heavier and a lot cheaper to maintain. Available in Di2 and disc brake versions.
  • Shimano 105 – Super reliable workhorse gears may not be quite as smooth or as light as Ultegra but plenty good enough for most riders and much cheaper to maintain. Available in disc brake versions but not in Di2 (yet).
  • Shimano Tiagra – normally fitted on bikes in the £800 to £900 price range Tiagra gears are solid and do the job but they are currently only available in 10 speed mechanical rim brake versions.
  • Shimano Sora – normally fitted to bikes in the £700 to £800 price range. Currently only available in 9 speed mechanical rim brake versions. Many people consider these to be the first ‘proper’ Shimano groupset.
  • Shimano Claris – Normally fitted to entry level bikes under £700. Claris gears are basic but do the job. They currently only come in 8 or 9 speed mechanical rim brake versions.


SRAM Gear Range Order

SRAM gears are less common than Shimano but do come fitted on a number of bikes we sell. In particular SRAM gears are finding their way onto a lot of gravel, adventure and cyclocross bikes as they make 1x versions of most of their gears. This means using a single chainring at the front and a wider gear range at the back. 1x setups are becoming the standard in mountain biking and are widely seen as being easier to maintain when they encounter a lot of mud and dirt. The levers on SRAM gears do work slightly different from Shimano with a double-tap system for shifting which take a little bit of getting used to if you are used to Shimano.

From top to bottom the SRAM gear range order is:

  • SRAM Red – Equivalent to Shimano Dura Ace, SRAM Red is the pro level setup used on many race winning bikes. Their electronic system is known as eTap and is totally wireless so you can have super clean lines on your bike. Red is available in 11 speed and comes in disc and rim brake versions.
  • SRAM Force – Force is often looked at as an equivalent to Shimano Ultegra but this a is a groupset which has been used by pro teams. It is available in 10 or 11 speed versions and in disc and rim break versions. Force is also available from SRAM as a 1x setup which can be used on road, cyclocross and adventure bikes.
  • SRAM Rival – Equivalent to Shimano 105 Rival is a good value groupset designed for long training rides. It is available in 10 and 11 speed versions and in a 1x setup.
  • SRAM Apex – The entry level SRAM groupset is equivalent to Shimano Tiagra. Apex comes in a compact setup (small chainrings at the front, big at the back) or 1x making it a very training and leisure focussed setup rather than an out and out road race one. The 1x version is available with disc or rim brakes whereas the standard double chainring version is rim brake only.


Campagnolo Gear Range Order

Campagnolo are the classic Italian gear manufacturers. Responsible for many of the innovations that modern gears are based on Campagnolo still make cutting edge, race winning, equipment. Campag (as it is often known) doesn’t come fitted on many bikes we sell and it can sometimes be hard to get spares but Campag is still the choice for many purists. Italian road bikes have long been seen as something a bit special, something with a little extra class. If you are going to have an Italian road bike then it needs to come with Campagnolo.

From top to bottom the Campagnolo gear order is:

  • Campagnolo Record and Super Record – The top of the range setup is the Super Record. Standard Record is roughly equivalent to Shimano Dura-Ace and SRAM Red with Super Record being made of even fancier materials to make it that little bit lighter (think all carbon fibre derailleurs). Available in mechanical and electronic versions (EPS) and in disc brake versions.
  • Campagnolo Chorus – Chorus sits between Shimano Ultegra and Dura-Ace in price. It’s a high performance setup that’s available in mechanical and electronic versions and with disc or rim brakes.
  • Campagnolo Portenza – a relatively new addition to the Campagnolo range it is seen as a direct equivalent to Shimano Ultegra and is available in disc or rim brake versions.
  • Campagnolo Centaur – The equivalent to Shimano 105, Centaur is the entry level Campagnolo groupset. Currently just available as an 11 speed mechanical rim brake setup.